SOLAR300
SOLAR300 carries out all the recommended tests to check the performance of single and three phase photovoltaic installations. SOLAR300 measures output DC power of the cells, output AC power of the inverter, solar radiation and temperature of the cells.
Measurement of AC and DC power requires the user to connect the instrument's
inputs to the DC input and AC output of the inverter. The values in single-phase
installations or in three-phase installations are acquired simultaneously.
Usually the inverter and the photovoltaic cells can be far from each other. To
avoid
the use of long cables, which can be inconvenient, SOLAR300 uses a remote
measuring device, SOLAR-01, that acquires the following parameters: solar
radiation, temperature of the cells and environmental temperature.
At the end of the recording, the values acquired by SOLAR-01 are transferred to
the SOLAR300 through an USB connection. SOLAR300 also records the following
parameters, the voltage/current harmonic analysis and the voltage anomalies
(sags, swells) detection. Thanks to its built-in memory and its compact flash
driver a considerable volume of data can be stored for further analysis.
The innovative touch screen system of SOLAR300 makes the data analysis extremely
easy. In addition, the management software "Topview" allows the user to create
professional reports displaying the company trade mark, the user's data, the
recording comments, etc.
