The AL-2VA is a single-phase Energy/Power logger (voltage and current). Setup the Logger using the Electrosoft software, then plug the equipment to be monitored to the attached socket.
This logger is designed to be installed by a competent person (generally an electrician or engineer). Once you're set up, just press the Start button to start logging! The onboard indicator will flash Green when logging.
When the logger's finished recording (or you've captured enough data!) just disconnect from supply, hook it up to your PC and download the information. Electrosoft will let you view the data immediately on-screen and save or export for later analysis.
The AL-2VA data logger is designed for carrying out energy audits. It is also used by facilities management, electricity management, electrical and site services and maintenance engineers to monitor energy consumption of electrical appliances. This helps them to understand and record total site energy usage and diagnose any related issues. As the product records both voltage and current, users can determine if low voltage is related to high current demands on site, or if the low voltage is being supplied to the site.
NB - current range of the unit is dependent on plug / socket type used, for example, NEMA 5/15 = 15A; BS1363 = 13A
The advantage of the Electrocorder products over most others is that our data loggers constantly sample information (recording the Min, Max and Average) over the set period, many other products only take 'snap shots' of what is going on and can miss 99.9% of the data that is critical to your analysis.
All sets above include a data logger, mains plug, mains socket, USB lead, Electrosoft software and a carry case.
|Determining product order codes: |
To specify your Electrocorder select various codes and enter into the boxes in order to create an accurate product code. For example: AL-2VA-5H-AZ-IP43-KIT.